EOT Crane

Product Details:

Features: 
•Higher load capacity
•Competitive cost
•Strength
•Enhanced efficiency 

Following are the unique attributes of EOT cranes: 

• Optimum design of the structure avoiding dead weight and reducing the cost of the equipment. 
• Very much suitable for power house cranes where these cranes are used for maintenance. 
• Economical Design by providing manual long and cross travel facility with a provision for using either an electric hoist or a motorized chain pulley block
• Low head room which in turn reduces the cost of the shed/building
• Customized design to match the budget of the customer
• Highly Competitive Prices 
• Motor Overload Protection - This feature comes in action to protect motors from excess current which comes due to elevator overloading. 
• Voltage Protection – This device gives the freedom to choose the lower level and higher level voltage. 
• Single Phase Protection - Elevator traction motor is a three phase motor, single phase protection protects the motor in case of any missing phase. 
• Reverse Phase Protection - This feature protects the motor in case of reverse phase problem. 
• Over Speed Protection can be accomplished by the Over Speed Governor which is a mechanical system which comes in action in case of rise in the travelling speed of the cabin due to any following reasons:- In case of brake failure. 
• In case of motor failure. 
• In case of gear box failure. And even in case of wire rope breaks. 
• In any of the above mentioned incidents, lift will never fall down, it will stop where it is because mechanical break holds the Guide T and it will be stopped inside the shaft and passenger or the material will be safe in any circumstances. 
• Emergency Stop Switch - Emergency stop switch is provided in COP to stop the cabin in case of any emergency or in case wrong command executed. 
• Final Limit Switch - final limit switch for upper motion comes in action when car doesn't stop on the extreme top floor, whereas final limit switch for downward motion comes in action when car doesn't stop on the lower most level. 
• Buffer – Buffer is provided in the elevator shaft to cure the damage of the cabin or the passenger / material inside the cabin. It gives spring action to the free fall cabin till it gets stopped this way or the passenger / material inside the cabin will be safe. Elevator Buffer are of the following types:- Hydraulic buffer 
• Spring buffer 
• Oil buffer  

Product Details:

Details:

• Our company has achieved widespread recognition in offering Double Girder Underslung Crane to the clients. It is precisely-designed by experts using quality assured raw-material and progressive technology in sync with industry quality standards. This product is tested on varied parameters of quality to maintain quality standard. Offered range is available in different specification and can be customized as request of clients. This product is hugely praised by client for superb attributes.
• Our array of Double Girder Underslung Crane is developed using finest quality raw material such as Ms Sheets, MS angles, I beam, motors, brakes. These are ideal for power house cranes where these cranes are used for maintenance. Our high performance gamut requires low maintenance and can be tailored as per the demand of clients.
• Our Double Girder Underslung Crane are used in Steel Plants, Induction Furnaces, Paper Mills, Cold Rolling Mills, Arc Furnace, Pipe Mills, Power Plants, Hydro Power Plant, Heavy Engineering Industries, Container Handling, Dyeing Plants/ Wooden Mills, Chemical & Pharmaceutical Units, Petro Chemical Industry. These cranes can be equipped for cabin, floor pendant control, joystick control, and radio control. The cabin can be attached to the bridge or trolley as in case of grabbing cranes. 

Features:

• Strong structure
• Light weight
• Long life span

Product Details:

Single Girder EOT Crane Supplier With Cost Effective Solutions & Standardized Range. High Handling Speeds With Excellent Functions & Solutions At Affordable Price, Inquire Us! Wide Standardized Ranges. Highest Quality. Advanced Technology. Excellent Services.

Product Details:

Single Girder EOT Crane Supplier With Cost Effective Solutions & Standardized Range. High Handling Speeds With Excellent Functions & Solutions At Affordable Price, Inquire Us! Wide Standardized Ranges. Highest Quality. Advanced Technology. Excellent Services.

Product Details:

Features:

• High performance
• Durable
• Sturdy
• Easy maintenance
• Corrosion resistance

Standard Features :

• Design : Compact dimensions, low weight, easy to operate and easy to maintain
• Motors : Motors will be Crane duty motors, squirrel cage induction motors for hoists and cranes also slip ring induction motors will be provided for heavy duty cranes as per the applications
• Gear Boxes : Precision flat helical / spur gear units in light alloy housings with case-hardened gears, high-grade surface treatment and permanent oil /grease lubrication
• Brakes : Single / Dual-disc Electro Magnetic DC Brakes featuring automatic braking on power failure

 

Product Details:

Semi Gantry Cranes are commonly used owing to the flexibility and safety, they offer. Gantry Cranes are available in a lot of variants. Some are fixed whereas some are adjustable. Below mentioned are a few variants of Gantry Cranes.

Portable Gantry Cranes: 

• These gantries are the ones that are most used due to the flexibility and disassembly feature they have.

 

Adjustable Gantry Cranes:

• This type of gantry cranes have the facility of adjusting heights, widths, etc. according to the requirement and nature of the area of work.  If there are space constraints, then use of adjustable gantry cranes is ideal.
• A few of gantry cranes are also able to function on rubber tyres where rails cannot be used. Also, gantry cranes are made available in all sizes for enabling use in small work places where a small, but heavy load is required to be lifted.

Product Details:

Salient Features :

Gantry Crane provide economical material handling in areas where an overhead crane system is not available or practical. Their safety and efficiency make them a frequent choice for production, installation and maintenance applications.
Type of gantry cranes are available in either fixed or adjustable height models. Both types can be disassembled into three components for greater portability.

• Gantry Crane are Mounting on four legs.

• Semi Gantry Mounting on 2 legs.

• Canti Leaver Single Side/Both Side.

Depending on the application, casters may be selected from a wide variety of sizes and styles. Casters are available from Bushman as optional equipment, or they may be provided by the purchaser.

Uses Of Gantry Crane:-

• Wave house yard, Rolling Mill, Steels Plants, Fabrication Yard, Constructions.

Product Details:

Box Type Double Girder Gantry Crane move along rails that are fixed on the ground. They are a safer and efficient option, when the use of Overhead cranes is not possible. Both the cranes are handled by one operator, making it less risky for operations.
Gantry/Goliath Cranes: Where they are used?
Gantry Cranes are used in most areas where heavy lifting of objects is required. A few of them are mentioned below.

Product Details:

 gantry crane is a crane built atop a gantry, which is a structure used to straddle an object or workspace. They can range from enormous "full" gantry cranes, capable of lifting some of the heaviest loads in the world, to small shop cranes, used for tasks such as lifting automobile engines out of vehicles.

Product Details:

Details:

• When it is required to lift a heavy object, Gantry Cranes are employed into use to do the needful.  They work by lifting heavy loads with a hoist, and can move horizontally over rails that are fitted under beams.Gantry Cranes are used to lift heavy objects and are frequently used for ship buildings, wherein heavy parts and engines need to be fixed. Developed in the modern times, Gantry Cranes are being used on a large scale since their development.Gantry Cranes move along rails that are fixed on the ground. They are a safer and efficient option, when the use of Overhead cranes is not possible. Both the cranes are handled by one operator, making it less risky for operations.

Product Details:

Our company is engaged in engineering, supplying and exporting a superior quality gamut of Double Girder I Beam Crane. Our these cranes are engineered from top quality material and latest technology in compliance with the defined industry norms. These double girder cranes are used in steel plants, induction furnace, paper mills, pipe plants, power plants, heavy engineering industry, container handling, chemical industries and many mores.

Product Details:

Being a leading name of the industry, we at Maxx Engineers are reckoned for manufacturing, supplying and exporting an industrial specific range of Used Industrial EOT Crane.Due to their outstanding quality and features, our products have found their large application in machine shop, foundry and engineering sections of industry.

Features:

• High performance
• Durable
• Sturdy
• Easy maintenance
• Corrosion resistance
• Tensile strength

Product Details:

Being a leading name of the industry, we are Provide an industrial specific range of Single Girder Box Type Crane. Due to their outstanding quality and features, our products have found their large application in machine shop, foundry and engineering sections of industry.

Limit Switches :

• To Prevent Over Hoisting & Over Lowering Of Hook.

Push Button Stations :

• Extra Light, Handling, Easy To Operate, Aluminum, Fabricated From Extruded Section.

Soft Starts :

• Electric / Electronic Soft Start Modules Electrically Coupled To The Long Travel Drives To Achieve Jerk Free, Cushioned & Smooth Starts.

Maintenance Platform With Hand Railing :

• Easy, Simple & Safe Maintenance Of The Crane Extended Partially Or Totally Along The Girder.
• Our Array Of Eot Cranes Is Developed Using Finest Quality Raw Material Such As Ms Sheets, Ms Angles, I Beam, Motors, Brakes. These Are Ideal For Power House Cranes Where These Cranes Are Used For Maintenance. Our High Performance Gamut Requires Low Maintenance And Can Be Tailored As Per The Demand Of Clients.

Features:

• High performance
• Durable
• Sturdy
• Easy maintenance
• Corrosion resistance
• Tensile strength

Product Details:

We are engaged in offering our esteemed clients a very highly premium quality range of Single Girder Crane. Our range is known for its excellent quality and durable range. Our range is highly appreciated by the clients in all over the nation and available at market most leading prices.

Features:

• Rugged construction
• Corrosion resistant
• Low operational cost
• High performance
• Durable
• Sturdy
• Easy maintenance
• Corrosion resistance

Standard Features:

Design:

• Compact Dimensions, Low Weight, Easy To Operate And Easy To Maintain.

Motors :

• Motors Will Be Crane Duty Motors, Squirral Cage Induction Motors For Hoists And Cranes Also Slipering Induction Motors Will Be Provided For Heavy Duty Cranes As Per The Applications.

Gear Boxes :

• Precision Flat Helical / Spur Gear Units In Light Alloy Housings With Case-hardened Gears, High-grade Surface Treatment And Permanent Oil /grease Lubrication.

Brakes :

• Single / Dual-disc Electro Magnetic Dc Brakes Featuring Automatic Braking On Power Failure.

Product Details:

 I Beam Single Girder Gantry Crane are used to lift heavy objects and are frequently used for ship buildings, wherein heavy parts and engines need to be fixed. Developed in the modern times, Gantry Cranes are being used on a large scale since their development.

Product Details:

Jump to Double girder EOT crane - Electric overhead traveling crane or EOT crane is one of the most common types of overhead crane, or called bridge ...

Product Details:

Following Are The Unique Attributes Of EOT Cranes:

• Optimum design of the structure avoiding dead weight and reducing the cost of the equipment.
• Very much suitable for power house cranes where these cranes are used for maintenance.
• Economical Design by providing manual long and cross travel facility with a provision for using either an electric hoist or a motorized chain pulley block
• Low head room which in turn reduces the cost of the shed/building
• Customized design to match the budget of the customer
• Highly Competitive Prices